swimming pools design

Swimming Pools and Cover Maintenance

SignaturePools · Jul 22, 2009 ·

One of the greatest benefits of being a Signature Pool’s customer is the ability to choose from so many options for their in ground fiberglass swimming pool. From tile to concrete colors, water features to covers, there are countless ways to personalize a swimming pool.

An auto-cover system is a great way to add a measure of safety to the pool area, along with retaining pool heat and keeping the water free of debris. But to get the maximum life out of an auto-cover, pool owners should keep a few things in mind when caring for the cover system:

Keep water and debris off the cover when it is closed. Leave a pump in the center of your closed cover and direct rain water off the pool area and drain into the surrounding landscaping. Too much water and debris can cause unnecessary strain on the cover material and components, and will shorten the life of the system.
Always keep the tracks clean. Inside the cover track is a rope that pulls the cover open and closed. If the tracks and ropes get filled with debris, friction can cause a rope to break or a pulley to fail. Use a garden hose with a spray nozzle on the end to remove any dirt, leaves, or other debris from inside the tracks.
Never operate your cover if the water level in the pool is low. The water underneath the cover helps to support its weight. If the water is too low, the cover will strain to open and the motor can be damaged.
Clean out the cover box. The area that holds the motor mechanism and cover roll can collect dirt, leaves and debris over time. Check inside the cover box and clean out anything that may have collected over time. Also make sure any ground water is properly draining from the box.

By following these maintenance tips, you can enjoy the benefits of an auto-cover system for years to come. Contact us at www.sigpoolschicago.mysites.io for more information and to build your own Signature Pool.

Signature Fiberglass Pools Customer Testimonials

SignaturePools · Jul 21, 2009 ·

Dear Mr. McNelis,

It took me almost three years to make a decision on a backyard pool. I met Todd Emmerson in August of 2006 about halfway into this decision. As you know, there are many choices a consumer has when it comes to back yard pools. It took me the first year just deciding on whether to go with a built in fiberglass pool. I looked at all types and discovered fiberglass was the easiest of all to maintain and operate.

Back in August 2006, Todd was very professional giving me different ideas that would work in my backyard. My only regret is that it took me so long to decide.

In February 2008 I contacted Todd again and told him that I reached a decision. Signature Pools was the company that I would hire to install my fiberglass pool. We decided on a kidney shaped pool that fit our backyard. Todd Even offered to stop by and spray paint the outline of the pool to give us an idea of how it would look in the backyard. What an eye opening experience that was. The pool that we chose was not quite the right one for our situation. Todd immediately made a recommendation and painted that outline in the yard. What a difference that made. We were able to get the right pool at the right price.

The installation was quick and easy. Within two days the pool was full of water and concrete was ready to be poured. We officially opened the pool on Memorial weekend. The weather was great and the pool was heated to a comfortable 85 degrees. The kids have been in it ever since. Not a day went passed this summer without a pool full of friends and family having a great time.

I will never regret purchasing a fiberglass pool from Signature Pools. Todd Emmerson (sales manager) and Jim Gavula (permit and job coordinator) made the whole process as easy as possible. But I guess the biggest surprise was to see you, the President and owner of the company, out there working the machinery that very first day. You and your team gave my family and me a great summer in 2008 and for many years to come!

Thanks again for all your help!

Jim and Kathleen Mahoney
Geneva, IL

Another Swimming Pool Customer Testimonial

SignaturePools · Jul 21, 2009 ·

Tom, Todd, and Jim –

I wanted to take a minute to say thank you for a job well done.

From the moment I made the first phone call inquiring about installing a pool until job completion, I felt confident in Signature Pool’s ability to accomplish our vision of a backyard getaway. Todd took the time to answer all of our questions, was very informative, and offered some very detailed design plans. Jim was very efficient in getting all of our plans in and permits approved by the village along with making sure everything on our pool was working properly. Tom was very professional during the installation process and the pool was completed sooner than estimated.

I would not hesitate to recommend your company to anybody seriously considering installing a pool. The durability and very low maintenance of the fiberglass pool in combination with the great work done by your company of planning and installing the pool has left our family feeling secure we made the right decision. We can hardly bring ourselves to close it down in anticipation of one more warm day.

Thanks Again!

Randy and Theresa Vasvery

Leisure Pools – Grand Elegance

Lemont, IL

Fiberglass Swimming Pool Summer Maintenance

SignaturePools · Jul 20, 2009 ·

dirty-filters2

It’s that time of the year for Illinois swimming pools!- Signature Pools and Spas is in full swing with new construction, and many of our existing customers are reminded to clean out their cartridge filters and inspect their salt generator cells on the equipment. Although fiberglass swimming pools are the easiest in ground pools to maintain, it’s important to perform these tasks to get the most enjoyment out of your swimming season and keep your equipment running smoothly.

Dirt, leaves, suntan lotion and other debris collects in the pool filter and needs to be cleaned out every so often. Take a look at the pressure gauge on top of your filter to see if the operating pressure has risen to the ‘dirty’ mark. Even if the gauge has not, it’s a good idea to clean the filters several times a year. Low return pressure, heater problems, and chlorine generation is all affected when filters get too dirty. You can also extend the life of the filters by keeping them as clean as possible. This will save money in the long run by not having to replace the cartridges as often.

Another important maintenance tip is to keep your chlorine/salt generator clean. As the system breaks the salt water in to sodium and chloride, (the chemical make-up of salt), mineral deposits can collect on the generator cell and diminish its capacity to generate chloride and sanitize the pool water. Most chlorine generator manufacturers recommend inspecting the cell every month to insure there is no mineral build-up on the component. Using a mild acid wash will eliminate any build-up and enhance the performance of your equipment. Refer to you specific manufacturer’s instructions for further information on cleaning the cell.

By keeping these components clean, you are able to extend the life of your inground pool equipment and ensure water chemistry balance through the remainder of this season.

If you have questions about your fiberglass swimming pool, water chemistry, or maintaining your pool equipment, feel free to contact Signature Pools and Spas at 630.845.1145 to ask a question or schedule a service call. You can always contact via the website at www.sigpoolschicago.mysites.io

Signature Pools is now on Youtube!

SignaturePools · Apr 30, 2009 ·

Check out our first of many Youtube videos. The video features some before, 3D Design, and after pictures for several projects we have done in the past. Feel free to leave a comment, rate the video, and add it to your ‘favorite’ list…don’t forget to check back soon for more videos!