SignaturePools

How much space do you REALLY have for a swimming pool?

SignaturePools · Apr 22, 2011 ·

Before you can realize your dreams of an in ground pool in your backyard there is an important first step you must take. Locate and take a good look at your plat of survey to determine just how much usable space you really have in your backyard. The vastness of your lawn can be deciving, and space may be more limited than you think. Make sure to keep the following things in mind when planning your in ground pool project:

Rear Easements: In many cases the rear portion of a property has an easement that runs along the back of the lot. This easement can be anywhere from 5 to 20 feet, and no permanent structures can be built in this area. Various utilities such as electric, telephone, and cable companies can use this easement to run underground wires for services. Take a look at your plat of survey to identify and locate the rear easement line.

Side Easements: Similar to rear easements, side easements can be used by utility companies to run wiring through your backyard. Your plat of survey will typically indicate these easements with a dashed line running parallel to the property lines and may be labeled with the abbreviation U.E. (utility easement).

Floodplain: This is a flat area near a river, stream, pond, or lake that provides water retention in the case of a flood. Although not always indicated on a plat of survey, this is an important area to be aware of when planning your swimming pool design and placement. As a general rule, no permanent structures can be built within a floodplain without significant engineering work to redirect any flood water that might otherwise accumulate in the area.

Distance from Residence: Many people don’t realize that your pool needs to be located a minimum distance from your home. Some municipalities require a specfic distance to the house- others specify a minimum amount of decking around the pool area. Either way, keep in mind that the pool placement will need to conform to local building codes and minimum distances. Contact your local building department for specifics on where the pool can and can’t be located in relation to your home.

As you can see there are many factors to consider when planning a pool. The first and most important thing to do is locate a scaled copy of your plat of survey. It is important that the plat is to scale so that new structures such as the pool, decking and patio can be shown with the same proportions as the rest of the property. When meeting with a pool designer it will be extremely helpful to have this document available and the sales person can help determine the best location for your new in ground pool. If you have any questions about specific pool location, plat of survey, or to schedule a sales appointment, please contact us or call us directly at 630.845.1145.

Pool Startup Tips: Opening your Swimming Pool for the 2011 Season

SignaturePools · Apr 1, 2011 ·

Moroccan 38 inground fiberglass pool

Every year around this time customers all over the Midwest prepare to have their swimming pools opened for the season. And, inevitably, every year we receive calls from customers asking questions on how to successfully prepare their pool for the coming summer. From proper water level to auto-cover and chemical questions, people sometime need a ‘refresher’ on the in’s and out’s of opening and maintaining a beautiful swimming pool from year to year. Here are a few pointers to get you started on the right foot:

1. Remove all standing water and debris from your pool cover. As obvious as this might sound, we can’t count the number of times a customer has asked us to open their pool….and the cover is FILLED with standing water and leaves from the fall and winter months. Before a pool cover can be removed (or retracted, in the case of auto-covers) it is imperative that all water and debris is first removed. Our winter covers come with a permeable mesh that allows rainwater and melted snow and ice to drain through. Leaves and branched need to be cleared before removing the cover. Auto-covers do not have a permeable membrane. These covers need to be pumped clear of all water before the cover will operate. Leaves and branches must also be removed before the cover is operated. If not, this debris will collect in the cover box and can damage the cover system.

2. Bring the water level in the pool half way up the skimmer. This is not a critical step but something to keep in mind, especially if you have an auto-cover. The cover is designed to be supported by the pool water underneth it. By having the water at the appropriate level, the cover can operate smoothly and easily as the pool is being started up for the season.

3. Even under perfect conditions there will be some sort of dirt or debris in the bottom of your pool. If you have a winter cover, the snow and ice that collected over the winter has now melted into the pool, bringing with it a fair amount of dirt. If you have an auto-cover with your pool, a few leaves may have blown into the pool through a small gap between the cover and pool wall. In either case be prepared to spend a little time removing or vacuuming this debris once the water is circulating.

4. Initial chemical balancing for the season is not a particularly difficult process, especially with a fiberglass pool. When your pool is first started up for the season you will most likely need to ‘shock’ the water in order to kill off any algae that has collected over the winter. Once the first round of shock wears off, test your pool chemicals to see where everything is starting at for the year. If you have specific questions about chemicals feel free to contact us or take a sample of water to a local pool store for analysis.

5. If you have a salt water chlorine generator on your pool make sure to heat the water to 77 degrees before testing the salt level of the water. The ideal level is 3500ppm (parts per million). The sensor in your pool equipment is calibrated to read the salt level most accurately while at this water temperature. A lower temperature will produce a false low reading and a higher water temperature will produce an inaccurately high reading. For every 5 degree change from the 77 degree point, the salt level will read 200ppm different from actual levels.

For those fiberglass pool owners in the Illinois and greater Chicago land area, you can download a copy of the Signature Pools 2011 opening letter directly on our website at http://www.signaturepoolschicago.com/wp-content/uploads/2011/04/Letter-for-openings-2011-Computer-Version.pdf

Can I install an in ground pool with a septic system or well? 3 things to consider

SignaturePools · Mar 25, 2011 ·

This is a great question we get from time to time! The short answer is yes, but there are a few things to keep in mind when installing an in-ground pool if you have an existing septic system or private well on your property.

1. Location, Location, Location:

Before you can determine where an in-ground pool can go, you will first need to determine where the existing septic tank and field is located, along with the well head (if applicable). Your local municipality or county health department may be able to help by looking up the building records for your property. They may find a septic survey, which will show the septic and well locations as build with the home. If not, a local septic service company can be contacted to survey and locate the system on your property.

2. Septic Tank and Lines:

Many times customers will peer into the vastness of their yard and think “I’ve got PLENTY of room for a pool!” While this can be the case, there are many instances when a septic field or tank will limit the available space and exact location of your new swimming pool. As a general rule, (at least in Illinois) the closest portion of the water’s edge cannot be any closer than 25′ to an existing septic line and 25′ to the septic tank.

2. Well Water:

In many cases a home with a septic system also has a private well on the property. Generally speaking, in Illinois the swimming pool must be located a minimum distance to the well head. This is usually not a problem, as most well heads are located in front yards, far away from the septic field or potential pool location, but keep this in mind when planning out your swimming pool project. Contact your local health department for specific regulations in your area.

3. Relocating or Eliminating a Line:

Occasionally a customer will need a line to their septic field moved in order to accommodate the desired location of the pool. Although this is not as common, it IS a possibility. Alternatively, a line may be able to be eliminated all together, giving enough room to maintain the required distance from the septic field. Contact your local septic installer for further information about this process.

With a little careful planning and consideration, there is no problem with installing an in-ground swimming pool if you have a septic system or private well on your property. Many of our existing customers have wrestled and won this battle, and the proof is now in their beautiful backyard swimming pool! If you have further questions about septic tanks, lines, private wells and how they all relate to your swimming pool, please feel free to contact us directly at 630.845.1145

Fiberglass Swimming Pool Rebate for Leisure Pools Riviera 30′

SignaturePools · Mar 15, 2011 ·

Riviera style fiberglass swimming pool New Brunfels, TX–

Leisure Pools of New Brunfels, Texas has announced a $650.00 homeowner direct rebate for their Riviera 30 model fiberglass pool. This rebate is available for a limited time only. Consumers who purchase the 30′ Riviera style fiberglass pool shell through an authorized Leisure Pool distributer will be eligible for the rebate, which will be mailed direct from the manufacturer upon final payment of the swimming pool contract.

The Riviera style pool, with its free-form curves and family play bench in the shallow end, is one of the most popular pool shapes on the market. This pool is perfect for the entire family. In fact, due to its overwhelming popularity, Leisure Pools has completed a second, duplicate Riviera 30 mold in order to keep up with the rise in consumer demand.

If you are considering the purchase of an inground swimming pool this season, please take a serious look at the Riviera 30 style pool. Not often does Leisure Pools offer rebates or sales on their products so make sure to take advantage while the offer is still available. If you have further questions about this manufacturer rebate, or to schedule a consultation with our sales and design manager, please contact Signature Pools directly at 630.845.1145.

Best Pool Design of 2010

SignaturePools · Mar 10, 2011 ·

We at Signature Pools have recently returned from the Leisure Pools Dealer Conference in San Antonio, Texas. The weekend was filled with fantastic educational programs and was a wonderful opportunity to network with other fiberglass pool builders from all over the country. From an up-close tour of the Leisure Pools factory and manufacturing process, to sales and marketing seminars presented by Marcus Sheridan and our friends at River Pools and Spas– the weekend was packed with useful industry information.

The conference concluded with a Cowboy Themed awards dinner that honored some of the country’s best swimming pool builders and design firms. We at Signature Pools were honored to be awarded the prestigious ‘Best Overall Design’ for 2010 along with two other awards: Best Riviera Style and Best Elegance Style pools of 2010. Pictures of these jobs will be available on our website soon. We would also like to congratulate Earl’s Pools of Pelham, Alabama for Best Moroccan Style, Pools Now of Del Rio, Texas for Best Tuscany Style, and Enchanted Pools of Albuquerque, New Mexico for Best Roman Style. Not only were we impressed by the other award-winning pools that were recognized that evening, but by the overall outstanding quality of the builders that comprises the Leisure Pools dealer network. The room was filled with some of the most talented and experienced individuals in the industry.

The weekend was also a great opportunity for Signature Pools to get some ‘face time’ with other swimming pool builders, designers and installers from the Leisure Pools dealer network. Meeting in person with such a large group of like-minded industry professionals provided us with a platform to brainstorm, dream and grow as a company. We at Signature Pools certainly look forward to next year’s dealer conference as well!